Single Pressure Controls PS1

  

Model	Adjustment range		Lowest setpoint, bar	Factory setting, bar	Pressure connection
	Upper setpoint, bar	Differential, bar
Low pressure controls
PS1-A3A	-0.5...7	0.5...5	-0.9	3.4/4.5	7/16"-20UNF
High pressure controls
PS1-A5A	6...31	2...15	3	16/20	7/16"-20UNF
PS1-R5A	6...31	ext. manual reset approx. 3 bar below setpoint	-	20	7/16"-20UNF

 

 

Dual Pressure Controls PS2

Combined Low and High Pressure Controls

Model	Adjustment range				Factory settings		Pressure connection
	Upper settpoint		Differential
	Left bar	Right bar	Left bar	Right bar	Left bar	Right bar
PS2-A7A	-0.5...7	6...31	0.5a...5	ca. 4 fix	3.5/4.5	20	7/16"-20UNF
PS2-L7A	-0.5...7	6...31	0.5a...5	external reset approx. 4 bar under setpoint	3.5/4.5	20	7/16"-20UNF

a) lowest possible setpoint: -0.9 bar

 

 

Pressure Limiter for high pressure protection
PSH TÜV / EN 12263

Model	Fixed setting		Reset	Max temperature		Pressure connection
	Cut-out bar	Cut-in bar		Ambient C°	Pressure connection C°
PS3-W6S	14.0	10.0	Auto	+70	+150	7/16”-20UNF female thread with Schrader opener and snubber
PS3-W6S	21.0	16.0
PS3-W6S	25.0	20.0
PS3-W6S	29.0	23.0
PS3-W6S	33.5	27.5

 

 

Pressure Limiter for low pressure protection
PSL TÜV / EN 12263   

Model	Fixed setting		Reset	Max temperature		Pressure connection
	Cut-out bar	Cut-in bar		Ambient C°	Pressure connection C°
PS3-W1S	0.3	1.8	Auto	+70	+150	7/16”-20UNF female thread with Schrader opener

 

Pressure Cut-Out for high pressure protection

PZH with snubber for direct compressor mounting TÜV / EN 12263​

Model	Fixed setting		Reset	Max temperature		Pressure connection
	Cut-out bar	Cut-in bar		Ambient C°	Pressure connection C°
PS3-B6S	27.3	approx. 5 bar below cut-out	external manual reset	+70	+150	7/16”-20UNF female thread with Schrader opener and snubber
PS3-B6S	36.0

 

Differential Pressure Switch FD series

Model	Time delay		Cut out		Cut in Fixed Setting, bar	Max. Differential Pressure, bar
	Adjustable, sec	Factory setting, sec	Adjusting Range Δp, bar	Factory Setting, bar
FD 113 ZU	20 ... 150	120	0.3 ... 4.5	0.7	0.2 above cut- out	-0.8 ... 12